Maxisil Wet Area

The premium wet area sealant

Acetic Cure

Maxisil Wet Area Ceramic Silicone is an acetic cure silicone recommended for all ceramic and porcelain tile areas. Maxisil Wet Area is designed especially for expansion joints in sanitary areas such as bathrooms, kitchens, and flooring sectors.

10.5fl oz (310ml)

*Please note that colour samples are not true to the actual colour. This is a guide only.

• Designed for use in wet areas including baths, showers and toilets

• Easy to use

• Contains built-in fungicides for mold resistance

• Can be used for both exterior and interior areas

• Excellent weather ability, resistant to ageing, UV radiation

• Resistant to chemicals and temperature

• Primerless adhesion to clean, dry surfaces such as ceramics, glass, acrylics, aluminum, painted wood with very good tooling and smoothing properties

• Time-saving with easy cleanup system

Click here to use the Colour matcher to find the perfect grout

How to Apply Silicone

Maxisil Mould Fungus Information

Maxisil Wet Area Safety Data Sheet AU

Maxisil Wet Area Safety Data Sheet NZ

Maxisil Wet Area Technical Data Sheet

VOC Content Test Certificate

Let’s talk about Mould

DEPTH OF JOINT	WIDTH OF JOINT
DEPTH OF JOINT	5mm	7mm	10mm	12mm	15mm	21mm	25mm
5mm	12.0*	8.0*	6.0*
7mm		6.0*	4.0*	3.0*
10mm			3.0*	2.5*	2.0*	1.5*
12mm				2.1*	1.7*	1.2*	1.0*
15mm					1.3*	1.0*	0.8*

*Metres per 300/310ml cartridge

Note: These values are approximate and serve as a rough guide for
right-angled joints.

The depth of the joints is measured to the rear of the profile.
The authorised dimensions of the joints are governed by
DIN 18540. Accordingly all exterior expansion and
connection joints must have a minimum width of 10mm
and a maximum width of 35mm. Up to a width of 15mm
the depth of the joint should correspond to the width.
If the width of the joint exceeds 15mm, then the depth
should be approx 2/3 of its width.